The Fluke 718 Pressure Calibrator provides a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.
- Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device
- Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
- Error % calculation for quicker pass/fail decision making in the field
- Best in class mA accuracy of 0.015% for better measurement confidence and workload coverage
- Min/Max/Hold to capture changing measurements
- Switch test feature for quicker and more accurate pressure switch testing
- New 1 and 300 psi pressure ranges mean fewer extra tools required
- 1, 30, 100 & 300 psi ranges now available
Fluke 718 300G Range -12 psi to 300 psi, (-850 mbar to 20 bar, -85 to 2068.42 kPa) Resolution 0.01 psi, 1 mbar, 0.1 kPa Over pressure 375 psi 25 bar Functions Zero, Min, Max, Hold, Damp General Specifications Maximum voltage 30 volts (non-operating) Temperature -40°C to 60°C Operating temperature -10°C to 55°C Relative humidity 95% (10°C to 30°C); 75% (30°C to 40°C); 45% (40°C to 50°C); 35% (50°C to 55°C) Operating altitude 3,000 M max Shock 1 M drop test Vibration Random, 2 g, 5 Hz – 500 Hz Safety CSA C22.2 No. 1010.1: 1992 EMC EN50082-1: 1992 and EN55022: 1994 Class B Size 216 x 94 x 66 mm (8.50 x 3.72 x 2.60 in) Weight 992 g (35 oz) Power, battery life 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718 Battery life 4 to 20 hours typical, depending on functions used Warranty Three years (one year on pressure pump in Fluke 718) Display LCD, 5 digit pressure and current simultaneous