Fluke 325 True RMS Clamp Meter

True RMS measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tools for commercial and residential electricians. The 323, 324 and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 325 also offers DC current and frequency measurements.

• Measurement capability

  • 400 A AC and DC current measurement
  • 600 V AC and DC voltage measurement
  • True RMS AC voltage and current for accurate measurements on non-linear signals
  • Resistance measurement up to 40 kΩ with continuity detection
  • Temperature and capacitance measurement
  • Frequency measurement

  Features

  • Slim, ergonomic design
  • Large, easy to read backlight display
  • CAT IV 300V/CAT III 600 V safety rating
  • Hold button
  • Two-year warranty
  • Soft carrying case

• Specifications
  AC current	Range	40.00 A / 400.0 A
  	Accuracy	2% ± 5 digits (45 Hz to 65 Hz) 2.5% ± 5 digits (65 Hz to 400 Hz)
  DC current	Range	40.00 A / 400.0 A
  	Accuracy	2% ± 5 digits
  AC voltage	Range	600.0 V
  	Accuracy	1.5% ± 5 digits
  DC voltage	Range	600.0 V
  	Accuracy	1.0% ± 5 digits
  Resistance	Range	400.0 Ω / 4000 Ω / 40.00 kΩ
  	Accuracy	1.0% ± 5 digits
  Continuity		≤ 30 Ω
  Capacitance		0 to 100.0 μF / 100μF to 1000 μF
  Frequency		5.0 Hz to 500.0 Hz
  AC response		True-RMS
  Backlight		Yes
  Data hold		Yes
  Contact temperature		-10.0°C to 400.0°C (14.0°F to 752.0°F)
  Min/Max		Yes
  Size	H x W x D (mm)	207 x 75 x 34
  	Max wire diameter	30 mm (600 MCM)
  	Weight	283 g
  Category rating		CAT III 600 V CAT IV 300 V
  Warranty		Two-year

  • • Title
      Fluke 320 Series Clamp Meters Data Sheet	Download