Elcometer 122 Testex® Replica Tape Pack of 10
Product Overview
The Elcometer 122 Testex® Replica Tape is designed to provide a permanent mould of the surface profile, which can then be measured using a thickness gauge.
Elcometer 122 Testex® Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile. The profile of the surface can then be measured using the Elcometer 124 Thickness Gauge.
Elcometer 122 Testex® Replica Tape is available in four profile ranges. It is important that the tape grade chosen is reflective of the profile being measured.
- For surface profiles between 12 & 25µm (0.5 & 1.0mils): Coarse Minus Tape
- For surface profiles between 20 & 38µm (0.8 & 1.5mils): Coarse Tape
- For surface profiles between 38 & 64µm (1.5 & 2.5mils): Average of Coarse and X-Coarse Tape
- For surface profiles between 64 & 115µm (2.5 & 4.5mils): X-Coarse Tape
- For surface profiles greater than 115µm (4.5mils): X-Coarse Plus Tape
Technical Specification
| Description | Profile Range | Part Number | |||
| 1 Roll | Pack of 10 | Pack of 50 | Pack of 100 | ||
|
Elcometer 122 Coarse Minus |
12 - 25μm (0.5 to 1mil) | E122----A1 | E122----A10 | E122----A50 | E122----A100 |
|
Elcometer 122 Coarse |
20 - 64μm (0.8 - 2.5mils) |
E122----B1 |
E122----B10 |
E122----B50 |
E122----B100 |
| Elcometer 122 X-Coarse | 38 - 115μm (1.5 - 4.5mils) | E122----C1 | E122----C10 | E122----C50 | E122----C100 |
| Elcometer 122 X-Coarse Plus | 115 - 127μm (4.5 - 5.0mils) | E122----F1 | E122----F10 | E122----F50 | E122----F100 |
Accuracy Statement
Profile Error (Coarse) Error (X-Coarse) mils microns mils microns mils microns 1.0 25 0.3 8 not applicable 2.0 50 not applicable 0.8 18 3.0 75 not applicable 1.1 27 4.0 100 not applicable 1.5 37